The EPEVER Tracer AN Series Solar Demand Controller is often a very economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for a wide array of photovoltaic (PV) apps.
Critical Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Photo voltaic Charge Controller technologies for remarkable photo voltaic Electrical power harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Display screen with real-time data checking.
Various Load Command Modes together with handbook and timer.
In depth Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are involved: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry place near to the battery bank.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Warning: Constantly stick to proper safety protocols and make sure the technique is powered off prior to connecting factors.
Action one: Connect the battery terminals to the demand controller (optimistic to good, negative to detrimental).
Phase 2: Join the solar panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability about the controller by connecting the battery very first.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Guide, timer, light Regulate.
5. Checking and Details Logging
The Tracer AN Sequence supports actual-time monitoring utilizing the MT50 remote meter.
Facts might be logged via the RS485 interaction port utilizing software for example Solar Station Laptop.
Remote checking is feasible While using the More info EPEVER WiFi module.
6. Troubleshooting Popular Difficulties
Problem one: No Energy Output
Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Above-Voltage Protection
Confirm the photo voltaic array’s voltage rating.
Regulate program parameters if vital.
Concern 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations while in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Improved Trustworthiness: Stable functionality less than variable loads.
Extended Battery Life: Regular and exact charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Remarkable choice for optimizing solar power era and extending battery existence. By next the above setup information, buyers can make sure greatest performance and method longevity.